Slackware 12.1 RC1 muy cerca!!

Con éstas palabras iniciaba el ChangeLog de Slackware-Current

Is this Slackware 12.1 RC 1 yet?  It has to be close.

Es ésto Slackware 12.1 RC 1? Está muy cerca!!!😀

Bueno así es que ya se acerca la versión 12.1 de Slackware, con una gran serie de cambios publicados:

Wed Mar 19 19:34:38 CDT 2008
Is this Slackware 12.1 RC 1 yet?  It has to be close.
a/e2fsprogs-1.40.8-i486-1.tgz:  Upgraded to e2fsprogs-1.40.8.
a/gpm-1.20.1-i486-5.tgz:  Default item to imps2, which works well with KVM
  boxes.  If you use a Synaptics pad with the third party driver, you may have
  to change this setting.
a/inotify-tools-3.13-i486-1.tgz:  Upgraded to inotify-tools-3.13.
a/kernel-generic-2.6.24.3-i486-2.tgz:  After much debate, the kernels have been
  recompiled with the CONFIG_SCSI_MULTI_LUN option enabled.  This was tried once
  and caused problems for real SCSI systems, but that really was many years ago
  and it's so handy to have this feature for multi-LUN card readers that we're
  going to try enabling this again.  Please report any problems.
  Upgraded to Linux 2.6.24.3 uniprocessor generic.s (requires initrd) kernel.
a/kernel-generic-smp-2.6.24.3_smp-i686-2.tgz:
  Recompiled with CONFIG_SCSI_MULTI_LUN.
a/kernel-huge-2.6.24.3-i486-2.tgz:  Recompiled with CONFIG_SCSI_MULTI_LUN.
a/kernel-huge-smp-2.6.24.3_smp-i686-2.tgz:
  Recompiled with CONFIG_SCSI_MULTI_LUN.
a/kernel-modules-2.6.24.3-i486-2.tgz:  Recompiled.
a/kernel-modules-smp-2.6.24.3_smp-i686-2.tgz:  Recompiled.
a/ntfs-3g-1.2310-i486-1.tgz:  After getting a lot of feedback on it, we're
  changing from ntfsprogs to ntfs-3g and putting it in the A series so that it
  can be used as the default NTFS filesystem.  All the best wishes to the
  ntfsprogs project for future improvement, but nftsprogs couldn't extract and
  compile the Linux kernel on an NTFS partition here, and ntfs-3g could.
  It also seems to have a better community and support going right now.
  Thanks to the users who wrote with their opinions to help make this decision.
a/pkgtools-12.1.0-noarch-5.tgz:  Default making a USB boot stick to off.
a/sysvinit-scripts-1.2-noarch-18.tgz:  Removed /etc/rc.d/rc.scanluns.
a/udev-118-i486-2.tgz:  Blacklist old bcm43xx driver (b43 and b43legacy are
  the recommended drivers now).
ap/alsa-utils-1.0.15-i486-2.tgz:  Set reasonable volume defaults if there are
  none in /etc/asound.state.  Thanks to Eric Hameleers.
ap/gutenprint-5.0.2-i486-1.tgz:  Upgraded to gutenprint-5.0.2.
ap/ntfsprogs-2.0.0-i486-1.tgz:  Removed (for now).
d/m4-1.4.10-i486-1.tgz:  Upgraded to m4-1.4.10.  Thanks to Kyle Guinn for
  reporting that m4-1.4.9 had a serious calculation bug.
d/pkg-config-0.23-i486-1.tgz:  Upgraded to pkg-config-0.23.
k/kernel-source-2.6.24.3_smp-noarch-2.tgz:  CONFIG_SCSI_MULTI_LUN is now the
  default in the supplied Slackware generic .config.
kde/kdelibs-3.5.9-i486-3.tgz:  Patched a problem with Kate mislocating the
  cursor after a block paste.  Thanks to Peter Sevens for showing me the fix.
l/atk-1.22.0-i486-1.tgz:  Upgraded to atk-1.22.0.
l/dbus-1.1.20-i486-1.tgz:  Upgraded to dbus-1.1.20.  Thanks to Robby Workman
  for helping to maintain the dbus build scripts.
l/dbus-glib-0.74-i486-2.tgz:  Rebuilt.
l/dbus-qt3-0.70-i486-2.tgz:  Rebuilt.
l/gnome-icon-theme-2.22.0-noarch-1.tgz:  Upgraded to gnome-icon-theme-2.22.0.
l/glib2-2.14.6-i486-3.tgz:  Set G_BROKEN_FILENAMES=1, and if the locale is
  UTF-8, then set G_FILENAME_ENCODING="@locale" (which will override the
  G_BROKEN_FILENAMES setting).  This should get us a little closer with UTF.
  Thanks to Dave Minton for pointing out the issue to Robby Workman, who
  (in turn), sent it in to me.
l/gtk+2-2.12.9-i486-1.tgz:  Upgraded to gtk+-2.12.9.
l/hal-info-20080313-noarch-1.tgz:  Upgraded to l/hal-info-20080313.
l/hicolor-icon-theme-0.10-noarch-3.tgz:  Don't make an icon-theme.cache file
  in /usr/share/icons.
l/lcms-1.17-i486-1.tgz:  Upgraded to lcms-1.17.
l/libart_lgpl-2.3.20-i486-1.tgz:  Upgraded to libart_lgpl-2.3.20.
l/pango-1.20.0-i486-1.tgz:  Upgraded to pango-1.20.0.
l/pygtk-2.12.1-i486-2.tgz:  Robby said it would help to recompile this.
l/wavpack-4.41.0-i486-1.tgz:  Added wavpack-4.41.0.
  This is needed for audacious WAV format support.
n/gnupg2-2.0.8-i486-1.tgz:  Upgraded to gnupg2-2.0.8.
n/gnutls-2.2.2-i486-1.tgz:  Upgraded to gnutls-2.2.2.
n/gpgme-1.1.6-i486-1.tgz:  Upgraded to gpgme-1.1.6.
n/libassuan-1.0.4-i486-1.tgz:  Upgraded to libassuan-1.0.4.
n/libksba-1.0.3-i486-1.tgz:  Upgraded to libksba-1.0.3.
n/libgcrypt-1.4.0-i486-1.tgz:  Upgraded to libgcrypt-1.4.0.
n/libgpg-error-1.6-i486-2.tgz:  Recompiled.
n/pinentry-0.7.5-i486-1.tgz:  Upgraded to pinentry-0.7.5.
n/samba-3.0.28a-i486-1.tgz:  Upgraded to samba-3.0.28a.
n/wireless-tools-29-i486-1.tgz:  Upgraded to wireless-tools-29.
x/libXScrnSaver-1.1.3-i486-1.tgz:  Upgraded to libXScrnSaver-1.1.3.
x/libXv-1.0.4-i486-1.tgz:  Upgraded to libXv-1.0.4.
x/libxkbfile-1.0.5-i486-1.tgz:  Upgraded to libxkbfile-1.0.5.
x/xf86-video-amd-2.7.7.7-i486-1.tgz:  Upgraded to xf86-video-amd-2.7.7.7.
x/xf86-video-apm-1.2.0-i486-1.tgz:  Upgraded to xf86-video-apm-1.2.0.
x/xf86-video-ark-0.7.0-i486-1.tgz:  Upgraded to xf86-video-ark-0.7.0.
x/xf86-video-ast-0.85.0-i486-1.tgz:  Upgraded to xf86-video-ast-0.85.0.
x/xf86-video-chips-1.2.0-i486-1.tgz:  Upgraded to xf86-video-chips-1.2.0.
x/xf86-video-cirrus-1.2.0-i486-1.tgz:  Upgraded to xf86-video-cirrus-1.2.0.
x/xf86-video-dummy-0.3.0-i486-1.tgz:  Upgraded to xf86-video-dummy-0.3.0.
x/xf86-video-fbdev-0.4.0-i486-1.tgz:  Upgraded to xf86-video-fbdev-0.4.0.
x/xf86-video-glint-1.2.0-i486-1.tgz:  Upgraded to xf86-video-glint-1.2.0.
x/xf86-video-i128-1.3.0-i486-1.tgz:  Upgraded to xf86-video-i128-1.3.0.
x/xf86-video-i740-1.2.0-i486-1.tgz:  Upgraded to xf86-video-i740-1.2.0.
x/xf86-video-neomagic-1.2.0-i486-1.tgz:  Upgraded to xf86-video-neomagic-1.2.0.
x/xf86-video-rendition-4.2.0-i486-1.tgz:
  Upgraded to xf86-video-rendition-4.2.0.
x/xf86-video-s3-0.6.0-i486-1.tgz:  Upgraded to xf86-video-s3-0.6.0.
x/xf86-video-s3virge-1.10.0-i486-1.tgz:  Upgraded to xf86-video-s3virge-1.10.0.
x/xf86-video-savage-2.2.0-i486-1.tgz:  Upgraded to xf86-video-savage-2.2.0.
x/xf86-video-siliconmotion-1.6.0-i486-1.tgz:
  Upgraded to xf86-video-siliconmotion-1.6.0.
x/xf86-video-sis-0.10.0-i486-1.tgz:  Upgraded to xf86-video-sis-0.10.0.
x/xf86-video-sisusb-0.9.0-i486-1.tgz:  Upgraded to xf86-video-sisusb-0.9.0.
x/xf86-video-tdfx-1.4.0-i486-1.tgz:  Upgraded to xf86-video-tdfx-1.4.0.
x/xf86-video-trident-1.3.0-i486-1.tgz:  Upgraded to xf86-video-trident-1.3.0.
x/xf86-video-tseng-1.2.0-i486-1.tgz:  Upgraded to xf86-video-tseng-1.2.0.
x/xf86-video-v4l-0.2.0-i486-1.tgz:  Upgraded to xf86-video-v4l-0.2.0.
x/xf86-video-vmware-10.16.0-i486-1.tgz:  Upgraded to xf86-video-vmware-10.16.0.
x/xf86-video-voodoo-1.2.0-i486-1.tgz:  Upgraded to xf86-video-voodoo-1.2.0.
xap/audacious-1.5.0-i486-1.tgz:  Upgraded to audacious-1.5.0.
xap/audacious-plugins-1.5.0-i486-1.tgz:  Upgraded to audacious-plugins-1.5.0.
xap/gkrellm-2.3.1-i486-2.tgz:  Recompiled against gnutls-2.2.2.
xap/pidgin-2.4.0-i486-2.tgz:  Recompiled against gnutls-2.2.2.
xap/xfce-4.4.2-i486-3.tgz:  Patched two Thunar bugs.
xap/xpdf-3.02pl2-i486-3.tgz:  Rebuilt adding an icon and .desktop file.
  Thanks to Selkfoster for the .desktop file and for pointing out the icon.
extra/grub/grub-0.97-i486-5.tgz:  Recompiled without the inode patch since
  e2fsprogs-1.40.8 broke the GRUB we patched to work with e2fsprogs-1.40.6.
extra/linux-2.6.24.3-nosmp-sdk/:  Updated SMP to no-SMP kernel source patch.
extra/parted/parted-1.8.8-i486-1.tgz:  Upgraded to parted-1.8.8.
extra/slackpkg/slackpkg-2.70.1-noarch-1.tgz:
  Upgraded to slackpkg-2.70.1-noarch-1.  Thanks to Piter Punk.
isolinux/initrd.img:  Offer ntfs-3g read-write mounts for NTFS partitions.
  Upgraded to parted-1.8.8.  Upgraded to e2fsprogs-1.40.8.
kernels/hugesmp.s/*:  Recompiled with CONFIG_SCSI_MULTI_LUN.
kernels/huge.s/*:  Recompiled with CONFIG_SCSI_MULTI_LUN.
kernels/speakup.s/*:  Recompiled with CONFIG_SCSI_MULTI_LUN.
  Updated to latest Speakup GIT pull.
usb-and-pxe-installers/:  Offer ntfs-3g read-write mounts for NTFS partitions.
  Upgraded to parted-1.8.8.  Upgraded to e2fsprogs-1.40.8.

Enlaces:
ChangeLog -> ftp://ftp.slackware.com…ChangeLog.txt

Etiquetas: , , , ,

2 responses to “Slackware 12.1 RC1 muy cerca!!”

  1. Element2048 says :

    Que buena noticia ¡yes! ¡yes! me encanta =)

  2. dhabyx says :

    @Element: yo espero con ansias la 12.1, aunque se que tendré que reinstalar de nuevo😦

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s

A %d blogueros les gusta esto: